Product Center
Rail-mounted, crawler, wheeled and stationary hydraulic material handlers from 15 to 320 tonnes, in diesel, electric and dual power, plus lithium-battery electric grapples.
- Models
- 21
- Chassis types
- 4
- Attachments
- 15
Four chassis,
one for every site
The chassis follows your site layout; power, reach and grab follow the material and output.
Compare models in the selection guide
2 modelsRail-mountedPortal machines that travel on rails along berths and sidings, with electric drive and the longest reach in the range.View models 
8 modelsCrawlerTracked machines for soft or uneven ground at quays, rail yards and stockyards, in dual-power and diesel versions from 42 to 180 tonnes.View models 
4 modelsWheeledSolid tyres and outriggers: quick to move between work points on paved yards, stable once set down.View models 
6 modelsStationaryElectric-driven machines on a fixed pedestal or raised base for berths, rail sidings and feeding lines.View models 
1 modelLithium-batteryGrapples powered by a lithium-ion battery instead of a diesel engine: no exhaust emissions and quiet operation for urban and indoor work sites.View models 
15 attachmentsAttachmentsClamshell and orange-peel grabs, log and sorting grapples, shears, buckets, magnets and lifting gear matched to the machine and the material.View attachments 
Lithium-Battery-Powered Electric GrappleA Lithium-Battery-Powered Electric Grapple is an advanced type of hydraulic grapple that operates using a lithium-ion battery as its power source, instead of traditional fuel-based engines.View model 
Clamshell GrabIt closes tightly, offers strong gripping power and rotates 360°, preventing material spillage during operation.View model 
Orange Peel GrabMulti-tine grab whose tines close around the load from several sides.View model 
Scoop BucketThe scoop bucket is designed primarily for material reception and transfer operations.View model 
Container GrabThis container-specific grab features precise positioning and a secure grip, effectively preventing damage to containers.View model 
Log GrappleGrapple with curved tines for picking up, stacking and loading logs and timber.View model 
Lifting MagnetEquipment specifically designed for handling metal materials.View model 
Circular Lifting MagnetRound electromagnet for lifting ferrous scrap, steel balls, cast-iron ingots and machining turnings.View model 
Steel Coil ClampDesigned specifically for round steel coils.View model 
Hydraulic ShearHydraulic shear for cutting car bodies, steel sections and light scrap.View model Safe, efficient
and clean to run
Features from our product documentation. The equipment fitted to each model is confirmed in the quotation.
- Grab bottom-touch protectionA force sensor on the grab hanger and pressure feedback lift the boom before the grab strikes a wagon floor or ship hold.
- Hose-burst valvesExplosion-proof valves on the boom and stick cylinders stop the arms dropping if a hose bursts.
- Protected cabTempered glass with a guard grille; a balance valve on the cab-lift cylinder stops the cab dropping if a hose fails.
- Safe access and slewingGuardrails and ladders on the upper platform, with a beacon and buzzer while the machine slews.
- Tilt sensorAn alarm sounds and motion is limited when the machine leans more than 5°.
- Electrical protectionProtection against overload, overcurrent, overvoltage, overheating, short circuit, leakage and phase errors, with marine-grade cable for damp, salty, vibrating sites.
- Fire suppressionAutomatic fire suppression in the cab and engine compartment, with automatic, manual and mechanical emergency release.
- Energy recoveryA nitrogen-cylinder energy recovery system speeds up boom lifting and lowers overall energy use.
- Diesel or electricDual-power machines work on the diesel engine or on the electric motor.
- Round-the-clock lubricationFully automatic centralized lubrication supports 24-hour work and saves routine labour.
- Separate coolingIndependent cooling for the hydraulic oil, the engine and the electric motor keeps temperatures right in continuous work.
- Grab in view360° attachment rotation and an HD camera on the stick show the grab's position from the cab.
- One machine, many materialsChanging the attachment lets the same machine handle different materials.
- Electric driveNo exhaust at the machine and a lower operating cost than a diesel engine.
- Dust suppressionA spray system on the grab keeps down dust while material is handled.
Get a selection plan
Tell us about your material, site and output. Our engineers will recommend a machine type, configuration and grab, then send a quotation.
- Share your working conditionsMaterial, throughput, site and power supply
- Receive a recommended configurationChassis, power, reach and grab matched to the job
- Get a quotationBased on the configuration agreed with you
WhatsApp · Mr. Xu Fuyuan+86 184 3829 6999
YONGGONGHenan Huanghai Heavy Equipment Manufacturing Co., Ltd. — rail-mounted, crawler, wheeled and stationary material handlers since 1992.
Get a selection plan
Tell us about your material, site and output. Our engineers will recommend a machine type, configuration and grab, then send a quotation.
Prefer to talk? WhatsApp +86 184 3829 6999 or henanyonggong@163.com