YGZ2600 Rail-Mounted Electric Material Handler
Rail-mounted electric hydraulic material handler with 205 t operating weight.
- Operating weight
- 205,000 kg;
- Electric motors
- 280 + 160 kW;
- Grab capacity
- 8 m³;
- Boom / stick
- 10,500 / 7,500 mm;
Is it right
for your site?
Check location, power, reach and grab before you compare prices.
Reach where
the work is
Working range drawing from the manufacturer's documentation. Values are from the specification sheet.
Full specifications
Grouped as on the manufacturer's specification sheet.
- Motors
- YE3-355M-4 + YE3-315L1-4
- Rated power
- 280 kW + 160 kW
- Rated speed
- 1,480 rpm
- Voltage
- 380 V
- Frequency
- 50 Hz
- Protection
- Earth leakage, overload, overheating, phase sequence
- Starting method
- Variable-frequency drive (VFD) start
- Recommended cable
- 2-3×240+1×120
- Cab external dimensions
- 2,330 × 1,300 × 2,200 mm
- Upper structure width (excl. side steps)
- 3,900 mm
- Cab width
- 1,000 mm
- Cab overall height
- 7,150 mm
- Fixed cab riser
- 1,800 mm
- Operator eye level
- 6,100 mm
- Wheelbase
- 8,500 mm
- Overall length
- 13,030 mm
- Track gauge
- 8,500 mm
- Undercarriage overall width
- 10,295 mm
- Tail swing radius
- 6,000 mm
- Counterweight ground clearance
- 2,840 mm
- Minimum ground clearance
- 200 mm
- Boom length
- 10,500 mm
- Stick length
- 7,500 mm
- Grab capacity
- 8 m³
Source: manufacturer's published specification table. Specifications may change; the quotation confirms the configuration.
Standard, optional
and made to order
What comes with the machine and what you can add, so the quotation covers exactly what you need.
Standard
- Two electric motors, 280 kW + 160 kW, variable-frequency drive start
- Fixed cab riser, 1,800 mm
Optional
- Other grabs and attachments: see the range
- Further adaptations discussed with your working conditions
What you can
check on paper
Key figures for this model, taken from its official specification sheet.
Electric drive
Runs on 380 V grid power at a fixed work area, with variable-frequency drive (vfd) start.
Source: spec sheet · electric motorA higher view into holds and wagons
Operator eye level 6,100 mm above ground.
Source: spec sheet · dimensionsProof you
can check
Export references for this model are shared during the quotation. Our project list covers 92 machines delivered to 13 countries.
Before you
place an order
Lead time, site preparation, warranty, parts and support.
What is the lead time?
Lead time depends on the configuration and order quantity, and is confirmed in the quotation.
What do we need on site?
Rails laid to the specified gauge along the working line, plus the electric supply (380 V / 50 Hz). Rail, foundation and power details are confirmed with your layout drawing. We install and commission on site, or guide your team through it.
What does the warranty cover?
Repairs within the warranty period are free of charge. The warranty period and scope are set out in your contract.
How are spare parts supplied?
Our parts storage center keeps common, wear and maintenance parts in stock and ships them by the most suitable logistics route.
Is technical support available after delivery?
Technical consultation is available by telephone 24 hours a day, and our service team follows up regularly.
How do I choose between the YGZ2600 and other models?
Start from your material, the radius you need and your throughput. Send us your working conditions and we will recommend a model and grab. The selection guide compares the whole range.
Compare with
similar machines
Get a selection plan for your site
The more we know about your material and site, the more precise the configuration and quotation.
- Share your working conditionsMaterial, throughput, site and power supply
- Receive a recommended configurationChassis, power, reach and grab matched to the job
- Get a quotationBased on the configuration agreed with you
YONGGONGHenan Huanghai Heavy Equipment Manufacturing Co., Ltd. — rail-mounted, crawler, wheeled and stationary material handlers since 1992.
Get a selection plan
Tell us about your material, site and output. Our engineers will recommend a machine type, configuration and grab, then send a quotation.
Prefer to talk? WhatsApp +86 184 3829 6999 or henanyonggong@163.com