YGLZ600 Wheeled Diesel Material Handler
Wheeled diesel hydraulic material handler with a 18.36 m working radius and 73 t operating weight.
- Operating weight
- 73,000 kg;
- Max working radius
- 18,360 mm;
- Diesel engine
- 264 kW;
- Max grab height
- 15,650 mm;
Is it right
for your site?
Check location, power, reach and grab before you compare prices.
Reach where
the work is
Working range drawing from the manufacturer's documentation. Values are from the specification sheet.
Full specifications
Grouped as on the manufacturer's specification sheet.
- Make / model
- Cummins QSL8.9-C360
- Rated power
- 264 kW
- Rated speed
- 2,100 rpm
- Max torque
- 1,500 N·m
- Displacement
- 8.9 L
- Fuel consumption rate
- ≤229 g/kWh
- Emission standard
- China non-road Stage III
- Fuel tank capacity
- 390 L
- Main pump
- TOBIS (Korea) TBP200DT, variable-displacement axial piston, × 1
- Rated flow
- 2 × 400 + 30 L/min
- Working pressure
- 32 MPa
- Main control valve
- Hyundai / KYB (Korea) KVMG400
- Hydraulic tank capacity
- 640 L
- Pilot pump
- Gear pump, 30 L/min, × 1
- Relief pressure, swing motor
- 28 MPa
- Main relief pressure, working equipment
- 32 MPa
- Main relief pressure, travel
- 35 MPa
- Main relief pressure, grab
- 28 MPa
- Hydraulic cylinders
- Imported seals; hose-burst protection valve on the boom
- Hoses
- Gates / Eaton, throughout the machine
- Travel motor
- Beijing Huade / Shanghai Yufeng A6V160
- Swing motor
- Kawasaki (Japan) M5X180
- Swing speed
- 0–10 rpm
- Travel speed
- 0–5 km/h
- Max gradeability
- 7°
- Slewing ring raceway centre diameter
- 1,528 mm
- Axles
- Xuzhou 2WD axles; front-axle steering, rear-axle drive
- Transmission
- Liansheng
- Outriggers
- H-type, operated from the cab
- Tyres
- 14.00-24 solid (non-pneumatic)
- Cab external dimensions (with protective grille)
- 1,800 × 1,000 × 1,620 mm
- Cab interior
- Aviation-style seat, pilot controls, air conditioning
- Air conditioner
- 24 V vehicle air conditioner
- Lubrication
- Automatic lubrication system
- Attachment rotation
- 360° unlimited
- Body equipment
- Left/right mirrors, warning lights, overload alarm
- Upper structure width (excl. side steps)
- 3,400 mm
- Cab width
- 1,000 mm
- Fixed cab riser (provisional)
- 1,000 mm
- Cab overall height
- 4,700 mm
- Operator eye level
- 4,150 mm
- Tail swing radius
- 5,000 mm
- Counterweight ground clearance
- 1,745 mm
- Minimum ground clearance
- 280 mm
- Wheel track
- 2,690 mm
- Wheelbase
- 3,400 mm
- Outrigger span, transverse
- 5,000 mm
- Outrigger span, longitudinal
- 5,940 mm
- Undercarriage width
- 3,570 mm
- Undercarriage length (excl. ladder)
- 6,860 mm
- Boom length
- 10,500 mm
- Stick length
- 7,500 mm
- Grab capacity
- 0.8 m³
- Weight
- 1,950 kg
- Capacity
- 0.8 m³
- Working pressure
- 28 MPa
- Max opening
- 2,575 mm
- Type
- Five-tine semi-closed
- Tooth tip material
- NM650
- Max grab height
- 15,650 mm
- Radius at max grab height
- 9,500 mm
- Max grab radius
- 18,360 mm
- Max grab radius at ground level
- 18,340 mm
- Max grab depth
- 8,570 mm
- Radius at max grab depth
- 11,640 mm
Source: manufacturer's published specification table. Specifications may change; the quotation confirms the configuration.
Standard, optional
and made to order
What comes with the machine and what you can add, so the quotation covers exactly what you need.
YGM0.8
- Weight
- 1,950 kg
- Capacity
- 0.8 m³
- Working pressure
- 28 MPa
- Max opening
- 2,575 mm
- Type
- Five-tine semi-closed
Standard
- Cummins QSL8.9-C360 diesel engine, 264 kW
- TBP200DT main pump, Hyundai/KYB KVMG400 main valve
- Kawasaki M5X180 swing motor, A6V160 travel motor
- Xuzhou 2WD axles (front steering, rear drive), Liansheng transmission
- H-type outriggers operated from the cab
- 14.00-24 solid tyres
- Fixed cab riser, 1,000 mm, cab with protective grille
- Imported cylinder seals; hose-burst protection valve on the boom
- Gates / Eaton hoses
- Automatic lubrication
- 24 V vehicle air conditioner
- Aviation-style seat, pilot controls
- Mirrors, warning lights and overload alarm
- 360° unlimited attachment rotation
- YGM0.8 five-tine semi-closed grab, 0.8 m³
Optional
- Other grabs and attachments: see the range
- Further adaptations discussed with your working conditions
What you can
check on paper
Key figures for this model, taken from its official specification sheet.
Diesel power
Cummins QSL8.9-C360 engine, China non-road Stage III; no grid connection needed.
Source: spec sheet · diesel engineA higher view into holds and wagons
Operator eye level 4,150 mm above ground.
Source: spec sheet · dimensionsReach from one position
Max working radius 18,360 mm, grab height 15,650 mm and depth 8,570 mm.
Source: spec sheet · working rangeCentralized lubrication
Automatic lubrication, to simplify routine maintenance.
Source: spec sheet · equipmentProof you
can check
Delivered: YGLZ600
- SerbiaYGLZ600Wheeled material handler2 units
- RussiaYGLZ600Wheeled material handler1 unit
Before you
place an order
Lead time, site preparation, warranty, parts and support.
What is the lead time?
Lead time depends on the configuration and order quantity, and is confirmed in the quotation.
What do we need on site?
Firm, level ground for the tyres and outriggers. We install and commission on site, or guide your team through it.
What does the warranty cover?
Repairs within the warranty period are free of charge. The warranty period and scope are set out in your contract.
How are spare parts supplied?
Our parts storage center keeps common, wear and maintenance parts in stock and ships them by the most suitable logistics route.
Is technical support available after delivery?
Technical consultation is available by telephone 24 hours a day, and our service team follows up regularly.
How do I choose between the YGLZ600 and other models?
Start from your material, the radius you need and your throughput. Send us your working conditions and we will recommend a model and grab. The selection guide compares the whole range.
Compare with
similar machines
Get a selection plan for your site
The more we know about your material and site, the more precise the configuration and quotation.
- Share your working conditionsMaterial, throughput, site and power supply
- Receive a recommended configurationChassis, power, reach and grab matched to the job
- Get a quotationBased on the configuration agreed with you
YONGGONGHenan Huanghai Heavy Equipment Manufacturing Co., Ltd. — rail-mounted, crawler, wheeled and stationary material handlers since 1992.
Get a selection plan
Tell us about your material, site and output. Our engineers will recommend a machine type, configuration and grab, then send a quotation.
Prefer to talk? WhatsApp +86 184 3829 6999 or henanyonggong@163.com