YGSZ600 Crawler Dual-Power Material Handler
Crawler dual-power hydraulic material handler with a 15.78 m working radius and 60 t operating weight.
- Operating weight
- 60,000 kg;
- Max working radius
- 15,780 mm;
- Diesel engine
- 264 kW;
- Electric motor
- 200 kW;
Is it right
for your site?
Check location, power, reach and grab before you compare prices.
Reach where
the work is
Working range drawing from the manufacturer's documentation. Values are from the specification sheet.
Full specifications
Grouped as on the manufacturer's specification sheet.
- Make / model
- Cummins L9CS4 360C
- Rated power
- 264 kW
- Rated speed
- 2,100 rpm
- Max torque
- 1,600 N·m
- Displacement
- 8.9 L
- Fuel consumption rate
- ≤229 g/kWh
- Emission standard
- China non-road Stage IV
- Fuel tank capacity
- 440 L
- Make / model
- Beilide YE3-315L2-4
- Rated power
- 200 kW
- Rated speed
- 1,480 rpm
- Voltage
- 380 V
- Frequency
- 50 Hz
- Protection
- Phase sequence, earth leakage, overheating, overload
- Main pumps
- Kawasaki (Japan) K5V200DT, variable-displacement axial piston, × 2
- Rated flow
- 2 × 400 + 30 L/min
- Working pressure
- 32 MPa
- Main valve
- KYB (Japan) KVMG-400
- Hydraulic tank capacity
- 504 L
- Pilot pump
- Gear pump, 30 L/min, × 1
- Relief pressure, swing motor
- 28 MPa
- Main relief pressure, working equipment
- 32 MPa
- Main relief pressure, travel
- 35 MPa
- Main relief pressure, grab open/close
- 28 MPa
- Main relief pressure, grab rotation
- 12 MPa
- Hydraulic cylinders
- Imported seals; hose-burst protection valve on the boom
- Hoses
- Gates / Eaton, throughout the machine
- Boom lift assist
- Nitrogen cylinder
- Swing motor
- Kawasaki (Japan) M5X180
- Travel motor
- Doosan (Korea) TM70
- Swing speed
- 0–10 rpm
- Travel speed
- 0–4.2 km/h
- Max gradeability
- 30%
- Ground pressure
- 93.4 kPa
- Max tractive force
- 317 kN
- Slewing ring raceway diameter
- 1,528 mm
- Undercarriage rollers and track
- PC series
- Cab external dimensions
- 1,800 × 1,000 × 1,620 mm
- Cab interior
- Aviation-style seat, heating and air conditioning, hydraulic controls, safety glass
- Air conditioner
- 24 V vehicle air conditioner
- Lubrication
- Centralized lubrication
- Protection devices
- Overload alarm, overload limiting function
- Upper structure width (excl. side steps)
- 3,400 mm
- Cab width
- 1,000 mm
- Cab overall height
- 3,100 mm
- Cab lift
- 1,900 mm
- Operator eye level
- 2,700–4,600 mm
- Idler-to-sprocket distance
- 4,260 mm
- Track length
- 5,200 mm
- Track gauge
- 2,800 mm
- Track shoe width
- 800 mm
- Undercarriage width with track shoes
- 3,600 mm
- Tail swing radius
- 5,200 mm
- Counterweight ground clearance
- 1,190 mm
- Boom length
- 9,500 mm
- Stick length
- 7,500 mm
- Grab capacity
- 3.2 m³
- Weight
- 2,740 kg
- Capacity
- 3.2 m³
- Max opening
- 2,780 mm
- Inner width
- 2,000 mm
- Working pressure
- 28 MPa
- Rotation
- 360° unlimited
- Body material
- Q345B
- Tooth material
- NM400
- Spray system
- Standard
- Max grab height
- 12,120 mm
- Radius at max grab height
- 8,770 mm
- Max grab radius
- 15,780 mm
- Max grab radius at ground level
- 15,750 mm
- Max grab depth
- 10,200 mm
- Radius at max grab depth
- 9,300 mm
Source: manufacturer's technical parameter sheet, 2025. Specifications may change; the quotation confirms the configuration.
Standard, optional
and made to order
What comes with the machine and what you can add, so the quotation covers exactly what you need.
YGB3.2
- Weight
- 2,740 kg
- Capacity
- 3.2 m³
- Max opening
- 2,780 mm
- Inner width
- 2,000 mm
- Working pressure
- 28 MPa
Standard
- Dual power: Cummins L9CS4 360C diesel engine, 264 kW, plus 200 kW electric motor
- China non-road Stage IV engine
- Kawasaki K5V200DT main pumps, KYB KVMG-400 main valve
- Kawasaki M5X180 swing motor, Doosan TM70 travel motor
- Elevating cab, 1,900 mm lift
- Imported cylinder seals; hose-burst protection valve on the boom
- Nitrogen-cylinder boom lift assist
- Gates / Eaton hoses
- Centralized lubrication
- Aviation-style seat, heating and air conditioning, hydraulic controls, safety glass
- 24 V vehicle air conditioner
- Overload alarm and overload limiting function
- PC-series undercarriage rollers and track
- YGB3.2 grab, 3.2 m³, 360° unlimited rotation
- Spray system
Optional
- Other grabs and attachments: see the range
- Further adaptations discussed with your working conditions
What you can
check on paper
Key figures for this model, taken from its official specification sheet.
Electric mode at fixed work areas
Run on grid power at the berth or siding; keep the 264 kW diesel engine for travel and relocation.
Source: spec sheet · electric motorA higher view into holds and wagons
The cab lifts 1,900 mm, raising the operator's eye level to 4,600 mm.
Source: spec sheet · dimensionsReach from one position
Max working radius 15,780 mm, grab height 12,120 mm and depth 10,200 mm.
Source: spec sheet · working rangeCentralized lubrication
Centralized lubrication, to simplify routine maintenance.
Source: spec sheet · equipmentProof you
can check
Delivered: YGSZ600
- BangladeshYGSZ600Crawler material handler4 units
Related 600-class deliveries
- BangladeshYGZ600Crawler material handler2 units
- IndonesiaYGZ600Crawler material handler2 units
- RomaniaY600Crawler material handler1 unit
- KenyaYGZ600Crawler material handler1 unit
Before you
place an order
Lead time, site preparation, warranty, parts and support.
What is the lead time?
Lead time depends on the configuration and order quantity, and is confirmed in the quotation.
What do we need on site?
A level, compacted work area. For electric operation, a 380 V / 50 Hz supply. We install and commission on site, or guide your team through it.
What does the warranty cover?
Repairs within the warranty period are free of charge. The warranty period and scope are set out in your contract.
How are spare parts supplied?
Our parts storage center keeps common, wear and maintenance parts in stock and ships them by the most suitable logistics route.
Is technical support available after delivery?
Technical consultation is available by telephone 24 hours a day, and our service team follows up regularly.
How do I choose between the YGSZ600 and other models?
Start from your material, the radius you need and your throughput. Send us your working conditions and we will recommend a model and grab. The selection guide compares the whole range.
Compare with
similar machines
Get a selection plan for your site
The more we know about your material and site, the more precise the configuration and quotation.
- Share your working conditionsMaterial, throughput, site and power supply
- Receive a recommended configurationChassis, power, reach and grab matched to the job
- Get a quotationBased on the configuration agreed with you
YONGGONGHenan Huanghai Heavy Equipment Manufacturing Co., Ltd. — rail-mounted, crawler, wheeled and stationary material handlers since 1992.
Get a selection plan
Tell us about your material, site and output. Our engineers will recommend a machine type, configuration and grab, then send a quotation.
Prefer to talk? WhatsApp +86 184 3829 6999 or henanyonggong@163.com