YGSLZ500 Wheeled Dual-Power Material Handler
Wheeled dual-power hydraulic material handler with a 16.71 m working radius and 50 t operating weight.
- Operating weight
- 50,000 kg;
- Max working radius
- 16,710 mm;
- Diesel engine
- 140 kW;
- Electric motor
- 160 kW;
Is it right
for your site?
Check location, power, reach and grab before you compare prices.
Reach where
the work is
Working range drawing from the manufacturer's documentation. Values are from the specification sheet.
Full specifications
Grouped as on the manufacturer's specification sheet.
- Make / model
- Cummins B5.9CS4 190C
- Rated power
- 140 kW
- Rated speed
- 2,200 rpm
- Max torque
- 800 N·m
- Displacement
- 5.9 L
- Emission standard
- China non-road Stage IV
- Fuel consumption rate
- ≤238 g/kWh
- Fuel tank capacity
- 320 L
- Model
- YE3-315L1-4
- Rated power
- 160 kW
- Voltage
- 380 V
- Max current
- 285 A
- Frequency
- 50 Hz
- Rated speed
- 1,490 rpm
- Starting method
- Soft start
- Recommended cable
- 3×150+1×70, flexible copper
- Main pump, engine-driven
- Yantai Aidi F3V112DTP
- Main pump, motor-driven
- Kawasaki K5V160DT
- Main pump type
- Variable-displacement axial piston, × 2, max. 2 × 230 L/min
- Rated flow
- 2 × 230 + 30 L/min
- Working pressure
- 32 MPa
- Main valve
- Parker (Korea) AV-280
- Control
- Hydraulic pilot
- Hydraulic tank capacity
- 340 L
- Outrigger pump
- Gear pump, 95 L/min, × 1
- Pilot pump
- Gear pump, 30 L/min, × 1
- Relief pressure, swing motor
- 28 MPa
- Relief pressure, outriggers
- 20 MPa
- Relief pressure, working equipment
- 32 MPa
- Relief pressure, grab open/close
- 28 MPa
- Relief pressure, travel
- 35 MPa
- Hydraulic cylinders
- Imported seals
- Hoses
- Gates / Eaton (USA), throughout the machine
- Swing motor
- Kawasaki M5X180CH
- Travel motor
- Beijing Huade A2F160
- Swing speed
- 0–9 rpm
- Travel speed
- 0–5 km/h
- Max gradeability
- 5°
- Slewing ring raceway diameter
- 1,465 mm
- Axles
- Xuzhou single-drive axle; front-wheel steering, rear-wheel drive
- Transmission
- Hangchi 545HD
- Tyres
- 1200-24 solid
- Outriggers
- H-type, operated from the undercarriage
- Cab external dimensions
- 1,800 × 1,000 × 1,750 mm
- Cab interior
- Aviation-style seat, pilot controls
- Air conditioner
- 24 V vehicle heating and air conditioning
- Lubrication
- Automatic lubrication, whole machine
- Alarms
- Upper-structure swing alarm, overload alarm
- Camera monitoring
- At the front end of the working equipment
- Electrical slip ring
- 650 A
- Lifting magnet
- 0.9 m (as stated)
- Engine mode
- Powers all machine functions
- Electric motor mode
- Travel, upper-structure swing, boom raise/lower, stick in/out, grab open/close
- Upper structure width
- 3,000 mm
- Cab width
- 1,000 mm
- Cab overall height
- 5,050 mm
- Fixed cab riser
- 1,500 mm
- Operator eye level
- 4,600 mm
- Tail swing radius
- 4,100 mm
- Counterweight ground clearance
- 1,695 mm
- Minimum ground clearance
- 380 mm
- Wheel track
- 2,500 mm
- Wheelbase
- 3,130 mm
- Outrigger span, transverse
- 4,200 mm
- Outrigger span, longitudinal
- 5,100 mm
- Undercarriage width
- 3,200 mm
- Undercarriage length
- 5,800 mm
- Boom length
- 10,500 mm
- Stick length
- 7,500 mm
- Grab capacity
- 0.5 m³
- Weight
- 995 kg
- Capacity
- 0.5 m³
- Max opening
- 2,500 mm
- Working pressure
- 28 MPa
- Type
- Four-tine semi-closed
- Body material
- Q355
- Tooth material
- NM650
- Max grab height
- 14,320 mm
- Radius at max grab height
- 8,860 mm
- Max grab radius
- 16,710 mm
- Max grab radius at ground level
- 16,680 mm
- Max grab depth
- 8,120 mm
- Radius at max grab depth
- 10,320 mm
Source: manufacturer's technical parameter sheet, 2025. Specifications may change; the quotation confirms the configuration.
Standard, optional
and made to order
What comes with the machine and what you can add, so the quotation covers exactly what you need.
YGZ0.5
- Weight
- 995 kg
- Capacity
- 0.5 m³
- Max opening
- 2,500 mm
- Working pressure
- 28 MPa
- Type
- Four-tine semi-closed
Standard
- Dual power: Cummins B5.9CS4 190C diesel engine, 140 kW, plus 160 kW electric motor
- China non-road Stage IV engine
- Electric motor soft start
- Separate engine-driven (Yantai Aidi F3V112DTP) and motor-driven (Kawasaki K5V160DT) main pumps
- Parker AV-280 main valve, hydraulic pilot control
- Kawasaki M5X180CH swing motor, Beijing Huade A2F160 travel motor
- Xuzhou single-drive axle (front steering, rear drive), Hangchi 545HD transmission
- 1200-24 solid tyres
- H-type outriggers
- Fixed cab riser, 1,500 mm
- Automatic lubrication
- Gates / Eaton hoses
- 24 V vehicle heating and air conditioning
- Swing and overload alarms
- Camera at the front end of the working equipment
- Aviation-style seat, pilot controls
- 650 A electrical slip ring
- 0.9 m lifting magnet
- YGZ0.5 four-tine semi-closed grab, 0.5 m³
Optional
- Other grabs and attachments: see the range
- Further adaptations discussed with your working conditions
What you can
check on paper
Key figures for this model, taken from its official specification sheet.
Electric mode at fixed work areas
Run on grid power at the berth or siding; keep the 140 kW diesel engine for travel and relocation.
Source: spec sheet · electric motorA higher view into holds and wagons
Operator eye level 4,600 mm above ground.
Source: spec sheet · dimensionsReach from one position
Max working radius 16,710 mm, grab height 14,320 mm and depth 8,120 mm.
Source: spec sheet · working rangeCentralized lubrication
Automatic lubrication, to simplify routine maintenance.
Source: spec sheet · equipmentProof you
can check
Export references for this model are shared during the quotation. Our project list covers 92 machines delivered to 13 countries.
Before you
place an order
Lead time, site preparation, warranty, parts and support.
What is the lead time?
Lead time depends on the configuration and order quantity, and is confirmed in the quotation.
What do we need on site?
Firm, level ground for the tyres and outriggers. For electric operation, a 380 V / 50 Hz supply and the recommended 3×150+1×70, flexible copper cable. We install and commission on site, or guide your team through it.
What does the warranty cover?
Repairs within the warranty period are free of charge. The warranty period and scope are set out in your contract.
How are spare parts supplied?
Our parts storage center keeps common, wear and maintenance parts in stock and ships them by the most suitable logistics route.
Is technical support available after delivery?
Technical consultation is available by telephone 24 hours a day, and our service team follows up regularly.
How do I choose between the YGSLZ500 and other models?
Start from your material, the radius you need and your throughput. Send us your working conditions and we will recommend a model and grab. The selection guide compares the whole range.
Compare with
similar machines
Get a selection plan for your site
The more we know about your material and site, the more precise the configuration and quotation.
- Share your working conditionsMaterial, throughput, site and power supply
- Receive a recommended configurationChassis, power, reach and grab matched to the job
- Get a quotationBased on the configuration agreed with you
YONGGONGHenan Huanghai Heavy Equipment Manufacturing Co., Ltd. — rail-mounted, crawler, wheeled and stationary material handlers since 1992.
Get a selection plan
Tell us about your material, site and output. Our engineers will recommend a machine type, configuration and grab, then send a quotation.
Prefer to talk? WhatsApp +86 184 3829 6999 or henanyonggong@163.com