YGGZ260 Stationary Electric Material Handler
Stationary electric hydraulic material handler with a 12.2 m working radius and 20 t operating weight.
- Operating weight
- 20,000 kg;
- Max working radius
- 12,200 mm;
- Electric motor
- 75 kW;
- Max grab height
- 13,120 mm;
Is it right
for your site?
Check location, power, reach and grab before you compare prices.
Reach where
the work is
Working range measured from the grab centre. The drawing is schematic; the values are from the specification sheet.
Full specifications
Grouped as on the manufacturer's specification sheet.
- Model
- YX3-280S-4
- Rated power
- 75 kW
- Rated speed
- 1,480 rpm
- Voltage
- 380 V
- Frequency
- 50 Hz
- Protection
- Earth leakage, overload, overheating
- Main pump
- Doosan (Korea) T5V80DPT, variable-displacement axial piston, × 1
- Rated flow
- 2 × 115 + 26 L/min
- Working pressure
- 32 MPa
- Main valve
- Parker (Korea) AV-170
- Hydraulic tank capacity
- 180 L
- Pilot pump
- Gear pump, 26 L/min, × 1
- Relief pressure, swing motor
- 28 MPa
- Main relief pressure, working equipment
- 32 MPa
- Main relief pressure, grab open/close
- 28 MPa
- Main relief pressure, grab rotation
- 12 MPa
- Hydraulic cylinders
- Imported seals
- Hoses
- Gates, throughout the machine
- Swing motor
- Korea Advanced Precision Engineering SDS250 (as stated)
- Swing speed
- 0–8 rpm
- Slewing ring raceway diameter
- 1,250 mm
- Cab external dimensions
- 1,800 × 1,000 × 1,620 mm
- Cab interior
- Aviation-style seat, hydraulic controls, protective screen
- Air conditioner
- Yangzi household air conditioner
- Lubrication
- Centralized lubrication
- Electrical slip ring
- 250 A
- Alarms
- Swing alarm
- Upper structure width (excl. side steps)
- 2,700 mm
- Cab width
- 1,000 mm
- Cab overall height
- 5,250 mm
- Operator eye level
- 4,700 mm
- Tail swing radius
- 4,000 mm
- Boom length
- 6,300 mm
- Stick length
- 4,000 mm
- Grab capacity
- 1 m³
- Capacity
- 1 m³
- Weight
- 1,246 kg
- Max opening
- 1,800 mm
- Grab width
- 775 mm
- Working pressure
- 28 MPa
- Tine configuration
- 2+3 cross pattern
- Rotation
- 360° unlimited
- Max grab height
- 13,120 mm
- Max grab radius
- 12,200 mm
- Max grab depth
- 6,570 mm
Source: manufacturer's published specification table. Specifications may change; the quotation confirms the configuration.
Standard, optional
and made to order
What comes with the machine and what you can add, so the quotation covers exactly what you need.
YGM-1
- Capacity
- 1 m³
- Weight
- 1,246 kg
- Max opening
- 1,800 mm
- Grab width
- 775 mm
- Working pressure
- 28 MPa
Standard
- 75 kW YX3-280S-4 electric motor
- Doosan T5V80DPT main pump, Parker AV-170 main valve
- SDS250 swing motor
- Imported cylinder seals
- Gates hoses
- Centralized lubrication
- 250 A electrical slip ring
- Aviation-style seat, hydraulic controls, protective screen
- Yangzi household air conditioner
- Swing alarm
- YGM-1 grab, 1 m³, 2+3 cross tine pattern, 360° unlimited rotation
Optional
- Other grabs and attachments: see the range
- Further adaptations discussed with your working conditions
What you can
check on paper
Key figures for this model, taken from its official specification sheet.
Electric drive
Runs on 380 V grid power at a fixed work area.
Source: spec sheet · electric motorA higher view into holds and wagons
Operator eye level 4,700 mm above ground.
Source: spec sheet · dimensionsReach from one position
Max working radius 12,200 mm, grab height 13,120 mm and depth 6,570 mm.
Source: spec sheet · working rangeCentralized lubrication
Centralized lubrication, to simplify routine maintenance.
Source: spec sheet · equipmentProof you
can check
Export references for this model are shared during the quotation. Our project list covers 92 machines delivered to 13 countries.
Before you
place an order
Lead time, site preparation, warranty, parts and support.
What is the lead time?
Lead time depends on the configuration and order quantity, and is confirmed in the quotation.
What do we need on site?
A foundation for the pedestal or base at the work point, plus the electric supply (380 V / 50 Hz). Foundation and power details are confirmed with your layout drawing. We install and commission on site, or guide your team through it.
What does the warranty cover?
Repairs within the warranty period are free of charge. The warranty period and scope are set out in your contract.
How are spare parts supplied?
Our parts storage center keeps common, wear and maintenance parts in stock and ships them by the most suitable logistics route.
Is technical support available after delivery?
Technical consultation is available by telephone 24 hours a day, and our service team follows up regularly.
How do I choose between the YGGZ260 and other models?
Start from your material, the radius you need and your throughput. Send us your working conditions and we will recommend a model and grab. The selection guide compares the whole range.
Compare with
similar machines
Get a selection plan for your site
The more we know about your material and site, the more precise the configuration and quotation.
- Share your working conditionsMaterial, throughput, site and power supply
- Receive a recommended configurationChassis, power, reach and grab matched to the job
- Get a quotationBased on the configuration agreed with you
YONGGONGHenan Huanghai Heavy Equipment Manufacturing Co., Ltd. — rail-mounted, crawler, wheeled and stationary material handlers since 1992.
Get a selection plan
Tell us about your material, site and output. Our engineers will recommend a machine type, configuration and grab, then send a quotation.
Prefer to talk? WhatsApp +86 184 3829 6999 or henanyonggong@163.com