YGSZ750 Crawler Dual-Power Material Handler
Crawler dual-power hydraulic material handler with a 15.85 m working radius and 74.5 t operating weight.
- Operating weight
- 74,500 kg;
- Max working radius
- 15,850 mm;
- Diesel engine
- 264 kW;
- Electric motor
- 220 kW;
Is it right
for your site?
Check location, power, reach and grab before you compare prices.
Reach where
the work is
Working range drawing from the manufacturer's documentation. Values are from the specification sheet.
Full specifications
Grouped as on the manufacturer's specification sheet.
- Make / model
- Cummins L9CS4 360C
- Rated power
- 264 kW
- Rated speed
- 2,100 rpm
- Max torque
- 1,600 N·m
- Fuel consumption rate
- ≤213 g/kWh
- Displacement
- 8.9 L
- Emission standard
- China non-road Stage IV
- Fuel tank capacity
- 440 L
- Make / model
- Wannan YX3-355L1-4
- Rated power
- 220 kW
- Rated speed
- 1,480 rpm
- Voltage
- 380 V
- Frequency
- 50 Hz
- Starting method
- Soft start
- Protection
- Phase sequence, overload, overheating, earth leakage, rainproof
- Main pumps
- Kawasaki K5V212DT, variable-displacement axial piston, × 2
- Rated flow
- 2 × 420 + 30 L/min
- Pilot pump
- Gear pump, 30 L/min, × 1
- Relief pressure, swing motor
- 28 MPa
- Main relief pressure, working equipment
- 32 MPa
- Main relief pressure, travel
- 35 MPa
- Main relief pressure, grab open/close
- 28 MPa
- Main relief pressure, grab rotation
- 12 MPa
- Upper structure width (excl. side steps)
- 3,400 mm
- Cab width
- 1,000 mm
- Cab lift
- 1,900 mm
- Operator eye level
- 2,900–4,800 mm
- Cab overall height
- 3,500 mm
- Tail swing radius
- 5,500 mm
- Counterweight ground clearance
- 1,420 mm
- Minimum ground clearance
- 500 mm
- Idler-to-sprocket distance
- 4,600 mm
- Track length
- 5,600 mm
- Track gauge
- 4,070 mm
- Track shoe width
- 800 mm
- Undercarriage width with 800 mm track shoes
- 4,870 mm
- Boom length
- 9,500 mm
- Stick length
- 7,500 mm
- Grab capacity
- 2 m³
- Capacity
- 2 m³
- Weight
- 2,538 kg
- Max opening diameter
- 2,800 mm
- Min closed inner diameter
- 1,350 mm
- Working pressure
- 28 MPa
- Max grab height
- 12,780 mm
- Radius at max grab height
- 8,700 mm
- Max grab radius
- 15,850 mm
- Max grab radius at ground level
- 15,850 mm
- Max grab depth
- 9,820 mm
- Radius at max grab depth
- 9,300 mm
Source: manufacturer's published specification table. Specifications may change; the quotation confirms the configuration.
Standard, optional
and made to order
What comes with the machine and what you can add, so the quotation covers exactly what you need.
YGW-2
- Capacity
- 2 m³
- Weight
- 2,538 kg
- Max opening diameter
- 2,800 mm
- Min closed inner diameter
- 1,350 mm
- Working pressure
- 28 MPa
Standard
- Dual power: Cummins L9CS4 360C diesel engine, 264 kW, plus 220 kW Wannan electric motor
- China non-road Stage IV engine
- Electric motor soft start
- Kawasaki K5V212DT main pumps
- Elevating cab, 1,900 mm lift
- YGW-2 grab, 2 m³
Optional
- Other grabs and attachments: see the range
- Further adaptations discussed with your working conditions
What you can
check on paper
Key figures for this model, taken from its official specification sheet.
Electric mode at fixed work areas
Run on grid power at the berth or siding; keep the 264 kW diesel engine for travel and relocation.
Source: spec sheet · electric motorA higher view into holds and wagons
The cab lifts 1,900 mm, raising the operator's eye level to 4,800 mm.
Source: spec sheet · dimensionsReach from one position
Max working radius 15,850 mm, grab height 12,780 mm and depth 9,820 mm.
Source: spec sheet · working rangeProof you
can check
Delivered: YGSZ750
- BangladeshYGSZ750Crawler material handler2 units
Before you
place an order
Lead time, site preparation, warranty, parts and support.
What is the lead time?
Lead time depends on the configuration and order quantity, and is confirmed in the quotation.
What do we need on site?
A level, compacted work area. For electric operation, a 380 V / 50 Hz supply. We install and commission on site, or guide your team through it.
What does the warranty cover?
Repairs within the warranty period are free of charge. The warranty period and scope are set out in your contract.
How are spare parts supplied?
Our parts storage center keeps common, wear and maintenance parts in stock and ships them by the most suitable logistics route.
Is technical support available after delivery?
Technical consultation is available by telephone 24 hours a day, and our service team follows up regularly.
How do I choose between the YGSZ750 and other models?
Start from your material, the radius you need and your throughput. Send us your working conditions and we will recommend a model and grab. The selection guide compares the whole range.
Compare with
similar machines
Get a selection plan for your site
The more we know about your material and site, the more precise the configuration and quotation.
- Share your working conditionsMaterial, throughput, site and power supply
- Receive a recommended configurationChassis, power, reach and grab matched to the job
- Get a quotationBased on the configuration agreed with you
YONGGONGHenan Huanghai Heavy Equipment Manufacturing Co., Ltd. — rail-mounted, crawler, wheeled and stationary material handlers since 1992.
Get a selection plan
Tell us about your material, site and output. Our engineers will recommend a machine type, configuration and grab, then send a quotation.
Prefer to talk? WhatsApp +86 184 3829 6999 or henanyonggong@163.com