YGSZ1200 Crawler Dual-Power Material Handler
Crawler dual-power hydraulic material handler with a 19.28 m working radius and 120 t operating weight.
- Operating weight
- 120,000 kg;
- Max working radius
- 19,280 mm;
- Diesel engine
- 410 kW;
- Electric motor
- 280 kW;
Is it right
for your site?
Check location, power, reach and grab before you compare prices.
Reach where
the work is
Working range drawing from the manufacturer's documentation. Values are from the specification sheet.
Full specifications
Grouped as on the manufacturer's specification sheet.
- Make / model
- Cummins QSZ13-C550-30
- Rated power
- 410 kW
- Rated speed
- 1,900 rpm
- Max torque
- 2,300 N·m
- Displacement
- 13 L
- Air intake
- Turbocharged, air-to-air intercooled
- Emission standard
- China non-road Stage III
- Fuel tank capacity
- 640 L
- Make / model
- Shandong Yining YE2-355M-4
- Rated power
- 280 kW
- Rated speed
- 1,480 rpm
- Voltage
- 380 V
- Frequency
- 50 Hz
- Protection
- Earth leakage, overheating, overload
- Main pumps
- Kawasaki (Korea) K3V280DT, variable-displacement axial piston, × 2
- Rated flow
- 2 × 520 + 30 L/min
- Working pressure
- 32 MPa
- Main valve
- KYB KVMG-400
- Hydraulic tank capacity
- 720 L
- Pilot pump
- Gear pump, 30 L/min, × 1
- Relief pressure, swing motor
- 28 MPa
- Main relief pressure, working equipment
- 32 MPa
- Main relief pressure, travel
- 35 MPa
- Main relief pressure, grab
- 28 MPa
- Main relief pressure, grab rotation
- 12 MPa
- Hydraulic cylinders
- Imported seals; hose-burst protection valve on the boom
- Hoses
- Gates / Eaton, throughout the machine
- Swing motors
- Kawasaki (Japan) M5X180, × 2
- Travel motor
- Seungpo (Korea) FE22A
- Swing speed
- 10 rpm
- Travel speed
- 0–2.5 km/h
- Max tractive force
- 1,000 kN
- Max gradeability
- 15%
- Ground pressure
- 98.3 kPa
- Slewing ring raceway diameter
- 1,800 mm
- Undercarriage rollers and track
- DH series
- Cab external dimensions
- 1,800 × 1,000 × 1,620 mm
- Cab interior
- Aviation-style seat, climate control, hydraulic controls
- Air conditioner
- 24 V vehicle air conditioner
- Lubrication
- Centralized lubrication
- Electrical slip ring
- 800 A
- Upper structure width (excl. side steps)
- 3,600 mm
- Cab width
- 1,000 mm
- Cab overall height
- 10,000 mm
- Fixed cab riser
- 1,500 mm
- Operator eye level
- 9,550 mm
- Idler-to-sprocket distance
- 6,500 mm
- Track length
- 7,450 mm
- Track gauge
- 6,500 mm
- Track shoe width
- 900 mm
- Undercarriage width with track shoes
- 8,110 mm
- Overall length
- 16,800 mm
- Tail swing radius
- 5,200 mm
- Counterweight ground clearance
- 6,550 mm
- Boom length
- 11,000 mm
- Stick length
- 8,500 mm
- Grab capacity
- 3.5 m³
- Weight
- 2,380 kg
- Capacity
- 3.5 m³
- Max opening
- 2,940 mm
- Inner width
- 2,000 mm
- Working pressure
- 28 MPa
- Rotation
- 360° unlimited
- Body material
- Q345B
- Tooth material
- NM400
- Max grab height
- 20,700 mm
- Radius at max grab height
- 10,000 mm
- Max grab radius
- 19,280 mm
- Max grab radius at ground level
- 18,750 mm
- Max grab depth
- 6,890 mm
- Radius at max grab depth
- 11,000 mm
Source: manufacturer's published specification table. Specifications may change; the quotation confirms the configuration.
Standard, optional
and made to order
What comes with the machine and what you can add, so the quotation covers exactly what you need.
YGB3.5
- Weight
- 2,380 kg
- Capacity
- 3.5 m³
- Max opening
- 2,940 mm
- Inner width
- 2,000 mm
- Working pressure
- 28 MPa
Standard
- Dual power: Cummins QSZ13-C550-30 diesel engine, 410 kW, plus 280 kW electric motor
- Kawasaki K3V280DT main pumps, KYB KVMG-400 main valve
- Dual Kawasaki M5X180 swing motors, FE22A travel motors
- Fixed cab riser, 1,500 mm
- Imported cylinder seals; hose-burst protection valve on the boom
- Gates / Eaton hoses
- Centralized lubrication
- 800 A electrical slip ring
- Aviation-style seat, climate control, hydraulic controls
- 24 V vehicle air conditioner
- DH-series undercarriage rollers and track
- YGB3.5 grab, 3.5 m³, 360° unlimited rotation
Optional
- Other grabs and attachments: see the range
- Further adaptations discussed with your working conditions
What you can
check on paper
Key figures for this model, taken from its official specification sheet.
Electric mode at fixed work areas
Run on grid power at the berth or siding; keep the 410 kW diesel engine for travel and relocation.
Source: spec sheet · electric motorA higher view into holds and wagons
Operator eye level 9,550 mm above ground.
Source: spec sheet · dimensionsReach from one position
Max working radius 19,280 mm, grab height 20,700 mm and depth 6,890 mm.
Source: spec sheet · working rangeCentralized lubrication
Centralized lubrication, to simplify routine maintenance.
Source: spec sheet · equipmentProof you
can check
Export references for this model are shared during the quotation. Our project list covers 92 machines delivered to 13 countries.
Before you
place an order
Lead time, site preparation, warranty, parts and support.
What is the lead time?
Lead time depends on the configuration and order quantity, and is confirmed in the quotation.
What do we need on site?
A level, compacted work area. For electric operation, a 380 V / 50 Hz supply. We install and commission on site, or guide your team through it.
What does the warranty cover?
Repairs within the warranty period are free of charge. The warranty period and scope are set out in your contract.
How are spare parts supplied?
Our parts storage center keeps common, wear and maintenance parts in stock and ships them by the most suitable logistics route.
Is technical support available after delivery?
Technical consultation is available by telephone 24 hours a day, and our service team follows up regularly.
How do I choose between the YGSZ1200 and other models?
Start from your material, the radius you need and your throughput. Send us your working conditions and we will recommend a model and grab. The selection guide compares the whole range.
Compare with
similar machines
Get a selection plan for your site
The more we know about your material and site, the more precise the configuration and quotation.
- Share your working conditionsMaterial, throughput, site and power supply
- Receive a recommended configurationChassis, power, reach and grab matched to the job
- Get a quotationBased on the configuration agreed with you
YONGGONGHenan Huanghai Heavy Equipment Manufacturing Co., Ltd. — rail-mounted, crawler, wheeled and stationary material handlers since 1992.
Get a selection plan
Tell us about your material, site and output. Our engineers will recommend a machine type, configuration and grab, then send a quotation.
Prefer to talk? WhatsApp +86 184 3829 6999 or henanyonggong@163.com