YGSZ520 Crawler Dual-Power Material Handler
Crawler dual-power hydraulic material handler with a 13.63 m working radius and 51.5 t operating weight.
- Operating weight
- 51,500 kg;
- Max working radius
- 13,625 mm;
- Diesel engine
- 194 kW;
- Electric motor
- 160 kW;
Is it right
for your site?
Check location, power, reach and grab before you compare prices.
Reach where
the work is
Working range drawing from the manufacturer's documentation. Values are from the specification sheet.
Full specifications
Grouped as on the manufacturer's specification sheet.
- Make / model
- Cummins QSC8.3-C260-30
- Rated power
- 194 kW
- Rated speed
- 2,200 rpm
- Max torque
- 1,135 N·m
- Displacement
- 8.3 L
- Fuel consumption rate
- ≤232 g/kWh
- Emission standard
- China non-road Stage III
- Fuel tank capacity
- 390 L
- Model
- YX-315L1-4
- Rated power
- 160 kW
- Rated speed
- 1,480 rpm
- Voltage
- 380 V
- Frequency
- 50 Hz
- Starting method
- Soft start
- Protection
- Earth leakage, overload, overheating
- Main pumps
- TOBIS (Korea) / Kawasaki T5P140DT, variable-displacement axial piston, × 2
- Rated flow
- 2 × 280 + 30 L/min
- Working pressure
- 32 MPa
- Main valve
- Parker (Korea) AV-280
- Hydraulic tank capacity
- 504 L
- Pilot pump
- Gear pump, 30 L/min, × 1
- Relief pressure, swing motor
- 28 MPa
- Main relief pressure, working equipment
- 32 MPa
- Main relief pressure, travel
- 35 MPa
- Hydraulic cylinders
- Imported seals
- Boom lift assist
- Nitrogen cylinder
- Hoses
- Gates / Eaton, throughout the machine
- Swing motor
- Kawasaki (Japan) M5X180
- Travel motor
- Doosan (Korea) TM70
- Swing speed
- 0–10 rpm
- Max tractive force
- 317 kN
- Travel speed
- 0–4.3 km/h
- Max gradeability
- 30%
- Ground pressure
- 98 kPa
- Slewing ring raceway diameter
- 1,465 mm
- Undercarriage rollers and track
- PC series
- Cab external dimensions
- 1,800 × 1,000 × 1,620 mm
- Cab interior
- Aviation-style seat, hydraulic pilot control
- Air conditioner
- 24 V vehicle air conditioner
- Lubrication
- Centralized lubrication
- Electrical slip ring
- 650 A
- Upper structure width (excl. side steps)
- 3,200 mm
- Cab width
- 1,000 mm
- Cab lift
- 1,900 mm
- Operator eye level
- 2,700–4,600 mm
- Cab overall height
- 3,260 mm
- Overall length
- 13,400 mm
- Tail swing radius
- 4,300 mm
- Counterweight ground clearance
- 1,190 mm
- Minimum ground clearance
- 400 mm
- Idler-to-sprocket distance
- 4,020 mm
- Track length
- 4,800 mm
- Track gauge
- 2,600 mm
- Track shoe width
- 600 mm
- Undercarriage width with 600 mm track shoes
- 3,200 mm
- Boom length
- 8,600 mm
- Stick length
- 6,000 mm
- Grab capacity
- 1 m³
- Lifting magnet diameter
- 1,300 mm
- Weight
- 1,950 kg
- Capacity
- 1 m³
- Working pressure
- 30 MPa
- Max opening
- 2,575 mm
- Type
- Five-tine semi-closed
- Tooth tip material
- NM650
- Magnet diameter
- 1,300 mm
- Rated voltage
- 220 V DC
- Power supply
- 380 V mains or belt-driven generator
- Weight
- 2,100 kg
- Power consumption
- 13.4 kW
- Lifting capacity, steel balls
- 8,500 kg
- Lifting capacity, cast-iron ingots
- 1,100 kg
- Lifting capacity, machining turnings
- 1,100 kg
- Lifting capacity, grade 1 scrap steel
- 600 kg
- Max grab height
- 11,120 mm
- Radius at max grab height
- 7,390 mm
- Max grab radius
- 13,625 mm
- Max grab radius at ground level
- 13,620 mm
- Max grab depth
- 6,930 mm
- Radius at max grab depth
- 8,560 mm
Source: manufacturer's published specification table. Specifications may change; the quotation confirms the configuration.
Standard, optional
and made to order
What comes with the machine and what you can add, so the quotation covers exactly what you need.
YGM1
- Weight
- 1,950 kg
- Capacity
- 1 m³
- Working pressure
- 30 MPa
- Max opening
- 2,575 mm
- Type
- Five-tine semi-closed
Standard
- Dual power: Cummins QSC8.3-C260-30 diesel engine, 194 kW, plus 160 kW electric motor
- Electric motor soft start
- T5P140DT main pumps, Parker AV-280 main valve
- Kawasaki M5X180 swing motor, Doosan TM70 travel motor
- Elevating cab, 1,900 mm lift
- Imported cylinder seals; nitrogen-cylinder boom lift assist
- Gates / Eaton hoses
- Centralized lubrication
- 650 A electrical slip ring
- Aviation-style seat, hydraulic pilot control
- 24 V vehicle air conditioner
- PC-series undercarriage rollers and track
- YGM1 five-tine semi-closed grab, 1 m³
- MW5-130L lifting magnet, 1,300 mm
Optional
- Other grabs and attachments: see the range
- Further adaptations discussed with your working conditions
What you can
check on paper
Key figures for this model, taken from its official specification sheet.
Electric mode at fixed work areas
Run on grid power at the berth or siding; keep the 194 kW diesel engine for travel and relocation.
Source: spec sheet · electric motorA higher view into holds and wagons
The cab lifts 1,900 mm, raising the operator's eye level to 4,600 mm.
Source: spec sheet · dimensionsReach from one position
Max working radius 13,625 mm, grab height 11,120 mm and depth 6,930 mm.
Source: spec sheet · working rangeCentralized lubrication
Centralized lubrication, to simplify routine maintenance.
Source: spec sheet · equipmentProof you
can check
Delivered: YGSZ520
- SerbiaYGSZ520Crawler material handler1 unit
Related 520-class deliveries
- RussiaYGZ520Crawler material handler2 units
Before you
place an order
Lead time, site preparation, warranty, parts and support.
What is the lead time?
Lead time depends on the configuration and order quantity, and is confirmed in the quotation.
What do we need on site?
A level, compacted work area. For electric operation, a 380 V / 50 Hz supply. We install and commission on site, or guide your team through it.
What does the warranty cover?
Repairs within the warranty period are free of charge. The warranty period and scope are set out in your contract.
How are spare parts supplied?
Our parts storage center keeps common, wear and maintenance parts in stock and ships them by the most suitable logistics route.
Is technical support available after delivery?
Technical consultation is available by telephone 24 hours a day, and our service team follows up regularly.
How do I choose between the YGSZ520 and other models?
Start from your material, the radius you need and your throughput. Send us your working conditions and we will recommend a model and grab. The selection guide compares the whole range.
Compare with
similar machines
Get a selection plan for your site
The more we know about your material and site, the more precise the configuration and quotation.
- Share your working conditionsMaterial, throughput, site and power supply
- Receive a recommended configurationChassis, power, reach and grab matched to the job
- Get a quotationBased on the configuration agreed with you
YONGGONGHenan Huanghai Heavy Equipment Manufacturing Co., Ltd. — rail-mounted, crawler, wheeled and stationary material handlers since 1992.
Get a selection plan
Tell us about your material, site and output. Our engineers will recommend a machine type, configuration and grab, then send a quotation.
Prefer to talk? WhatsApp +86 184 3829 6999 or henanyonggong@163.com