YGGZ420 Stationary Electric Material Handler
Stationary electric hydraulic material handler with a 13.81 m working radius and 31.6 t operating weight.
- Operating weight
- 31,600 kg;
- Max working radius
- 13,810 mm;
- Electric motor
- 110 kW;
- Max grab height
- 10,500 mm;
Is it right
for your site?
Check location, power, reach and grab before you compare prices.
Reach where
the work is
Working range drawing from the manufacturer's documentation. Values are from the specification sheet.
Full specifications
Grouped as on the manufacturer's specification sheet.
- Make / model
- Shandong Yinneng YX3-135S-4 (as stated)
- Rated power
- 110 kW
- Rated speed
- 1,480 rpm
- Voltage
- 380 V
- Frequency
- 50 Hz
- Protection
- Phase sequence, earth leakage, overload, overheating
- Main pump
- Kawasaki / TOBIS (Korea) K3V112DT, variable-displacement axial piston, × 1
- Rated flow
- 2 × 160 + 25 L/min
- Working pressure
- 32 MPa
- Main valve
- Parker (Korea) AV-280
- Hydraulic tank capacity
- 340 L
- Pilot pump
- Gear pump, 25 L/min, × 1
- Relief pressure, swing motor
- 28 MPa
- Main relief pressure, working equipment
- 32 MPa
- Main relief pressure, grab open/close
- 28 MPa
- Main relief pressure, grab rotation
- 12 MPa
- Hydraulic cylinders
- Imported seals; hose-burst protection valve on the boom
- Hoses
- Gates / Eaton, throughout the machine
- Swing motor
- Starpo (Korea) SB22CA
- Swing speed
- 0–11 rpm
- Slewing ring raceway diameter
- 1,250 mm
- Cab external dimensions
- 1,800 × 1,000 × 1,620 mm
- Cab interior
- Aviation-style seat, hydraulic pilot control
- Air conditioner
- Yangzi household air conditioner
- Electrical slip ring
- 350 A
- Lubrication
- Centralized lubrication
- Upper structure width (excl. side steps)
- 3,000 mm
- Cab width
- 1,000 mm
- Cab overall height (excl. base)
- 2,200 mm
- Cab lift
- 1,900 mm
- Tail swing radius
- 4,350 mm
- Counterweight ground clearance (tentative)
- 800 mm
- Boom length
- 8,600 mm
- Stick length
- 6,000 mm
- Grab capacity
- 0.8 m³
- Weight
- 2,150 kg
- Capacity
- 0.8 m³
- Working pressure
- 28 MPa
- Max opening
- 2,530 mm
- Type
- Five-tine semi-closed
- Tooth tip material
- NM650
- Rotation (optional)
- 360° unlimited
- Max grab height
- 10,500 mm
- Radius at max grab height
- 7,000 mm
- Max grab radius
- 13,810 mm
- Max grab radius at ground level
- 13,715 mm
- Max grab depth
- 8,670 mm
- Radius at max grab depth
- 8,520 mm
Source: manufacturer's published specification table. Specifications may change; the quotation confirms the configuration.
Standard, optional
and made to order
What comes with the machine and what you can add, so the quotation covers exactly what you need.
YGM0.8
- Weight
- 2,150 kg
- Capacity
- 0.8 m³
- Working pressure
- 28 MPa
- Max opening
- 2,530 mm
- Type
- Five-tine semi-closed
Standard
- 110 kW electric motor
- K3V112DT main pump, Parker AV-280 main valve
- SB22CA swing motor
- Elevating cab, 1,900 mm lift
- Imported cylinder seals; hose-burst protection valve on the boom
- Gates / Eaton hoses
- Aviation-style seat, hydraulic pilot control
- Yangzi household air conditioner
- 350 A electrical slip ring
- Centralized lubrication
- YGM0.8 five-tine semi-closed grab, 0.8 m³
Optional
- 360° unlimited grab rotation
- Other grabs and attachments: see the range
- Further adaptations discussed with your working conditions
What you can
check on paper
Key figures for this model, taken from its official specification sheet.
Electric drive
Runs on 380 V grid power at a fixed work area.
Source: spec sheet · electric motorReach from one position
Max working radius 13,810 mm, grab height 10,500 mm and depth 8,670 mm.
Source: spec sheet · working rangeCentralized lubrication
Centralized lubrication, to simplify routine maintenance.
Source: spec sheet · equipmentProof you
can check
Delivered: YGGZ420
- BrazilYGGZ420Stationary material handler4 units
Before you
place an order
Lead time, site preparation, warranty, parts and support.
What is the lead time?
Lead time depends on the configuration and order quantity, and is confirmed in the quotation.
What do we need on site?
A foundation for the pedestal or base at the work point, plus the electric supply (380 V / 50 Hz). Foundation and power details are confirmed with your layout drawing. We install and commission on site, or guide your team through it.
What does the warranty cover?
Repairs within the warranty period are free of charge. The warranty period and scope are set out in your contract.
How are spare parts supplied?
Our parts storage center keeps common, wear and maintenance parts in stock and ships them by the most suitable logistics route.
Is technical support available after delivery?
Technical consultation is available by telephone 24 hours a day, and our service team follows up regularly.
How do I choose between the YGGZ420 and other models?
Start from your material, the radius you need and your throughput. Send us your working conditions and we will recommend a model and grab. The selection guide compares the whole range.
Compare with
similar machines
Get a selection plan for your site
The more we know about your material and site, the more precise the configuration and quotation.
- Share your working conditionsMaterial, throughput, site and power supply
- Receive a recommended configurationChassis, power, reach and grab matched to the job
- Get a quotationBased on the configuration agreed with you
YONGGONGHenan Huanghai Heavy Equipment Manufacturing Co., Ltd. — rail-mounted, crawler, wheeled and stationary material handlers since 1992.
Get a selection plan
Tell us about your material, site and output. Our engineers will recommend a machine type, configuration and grab, then send a quotation.
Prefer to talk? WhatsApp +86 184 3829 6999 or henanyonggong@163.com